Uniden DSS7915+1 - Manual (Page 25)

24
Registering DSS7805WP Compatible Handsets
Disconnect the base AC adapter.
While holding the [find hs], reconnect the AC adapter until the charge LED starts blinking.
On the handset, press and hold [#] until you hear a beep.
While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION
COMPLETE is displayed; the handset has been registered to the base. If REGISTRATION FAILED appears,
please try these steps again.
Resetting the Handsets
If you want to register a handset to a different base or replace a handset with another one, you must first clear the
existing registration data. To clear, please follow these steps:
Press the MENU soft key. Select the DEREGISTER HS submenu.
DEREGISTER HS? appears. Move the cursor to select YES. Press the OK soft
key.
Or
From the handset, press and hold [ ] and [#/>] for more than 5 seconds. You will hear a confirmation tone,
and DEREGISTRATION COMPLETE appears.
After resetting the handset, place the handset to the base to register. You must re-register the handset before you
can use it. (See Registering DSS7905 Accessory Handset section on page 23 for registration instructions.)
)
2)
3)
4)
)
2)
)
&GTGIKUVGT*5!
;GU
0Q
$#%- &'.'6' 1-
&GTGIKUVGT*5!
;GU
0Q
$#%- &'.'6' 1-