Uniden DSS7915+1 - Manual (Page 6)

5
Terminology used in this Manual
Standby
The handset is not in use. If the handset is on the cradle or [ /flash] or [ ] is not pressed, no line
has been activated. No dial tone is present.
CID
Caller ID is available from your Telephone provider and is offered to users on a subscription basis.
With this service and a display on your cordless phone, you will be able to see the incoming caller
information such as name and phone number.
CID/CW or
CIDCW
Caller ID with Call Waiting is available by subscription from your Telephone provider. With this ser-
vice, you will be able to view incoming caller information while on a call with another user. This will
allow you the ability to select to talk to this user and put your existing party on hold or make the
decision to ring them back.
DirectLink If you have accessory handsets on your system, you can use two handsets as 2-way radios.
Accessory
Handsets
This phone system is expandable and will support a total of ten (0) handsets to one base. The
DSS7905 accessory handset is compatible with this model.
Global
settings
Global Settings apply to all registered handsets. If you change something under the global menu,
you change it for all handsets. Only one handset can change global settings at a time, and you
have to make sure the phone is not currently being used.
Station Any handset or the base.
Talk A telephone line has been activated on the handset or base, enabling a dial tone.