Uniden UDWC23 - Manual (Page 4)

4
Getting Started
Connecting the Power
Connect one end of
the AC adapter
to the camera’s
power connector
and the other
end to a standard
120 volt AC
outlet.
Press the
POWER
button on the
camera; the
Power status light
should turn on.
If it doesn’t, try
reconnecting the
AC adapter, and
make sure the
power outlet isn’t
controlled by a
wall switch.
Charging the Batteries
The batteries in your camera will charge whenever the power is connected. Let
the batteries charge completely (about 8 hours) before you unplug the camera
to move it around. (You can still use the camera: just keep it plugged in.)
1.
2.
LINK
POWER
Power
connector
Link
status
LINK
Antenna
Stand
Lens
Battery
status
Power
status
LINK
POWER
Power
connector
Link
status
LINK
Antenna
Stand
Lens
Battery
status
Power
status