Uniden UDWC23 - Manual (Page 5)

5
Learning the Buttons and Lights
Button What it does
POWER
Turn the camera on. Press and hold to turn it off.
LINk
Enter pairing mode.
Light State What it means
Power Status
light
On The camera is on.
Off The camera is off.
Link Status
light
Flashing The camera is in pairing mode.
Orange The camera is connected to the receiver.
Off The camera is in standby.
Battery
Status light
Green The battery is charging.
Red The battery is low; the camera will turn off in 3 minutes.
Off The battery is fully charged.
Using the Camera Mount
The camera has a built-in stand so you can place it on any flat surface. If you
want to place your camera on a wall or a ceiling (or even if you just want to
secure it to a flat surface), you can use the included camera mount. (You might
want to bring the receiver along when you mount the camera; it’s much easier
to get the camera into the right position when you have the display handy.)