Adv anced functions – Uniden DECT1805 User Manual
Page 11
If this is entered correctly, the Handset will start to search for the Base Station.
If the PIN is incorrect, a single low tone will be heard and another opportunity to
enter the PIN offered.
The Handset will display the Base Station RFPI. (The RFPI is a unique 10 digit number to
each Base Station and serves to indicate that a Base Station has been located.)
Press to accept the RFPI.
Finally a Handset number must be selected. Each Base Station can support up to six
Handsets. The display shows the available handset numbers:
Select the first available Handset number.
eg Press .
Note that the display shows the Base Station (left) and Handset (right) numbers:
HANDSET DE-REGISTRATION
Handsets can be de-registered from Base Stations as required.
Press .
The user is prompted for the System PIN.
The default System PIN is (see page 8)
Press the 4 digit PIN.
ADV
ANCED FUNCTIONS
int
INT
7
0
0 0
0 2
2 2
2 11 11 3
3 A
A 9
9 8
8
2
2 3
3 4
4 5
5 6
6
-
- 11 -
- 11
- - - -
Dect 1802 Qk 7/19/02 3:45 PM Page 11