Uniden DECT1805 - Manual (Page 20)

HANDSET RING VOLUME
The Handset Ring Volume can be adjusted through five levels (0 through 4).
Press then .
The display shows the current ring volume setting; the current setting is level 2
You may step through the available settings by pressing .
Confirm the setting by pressing
Disabling the ringer
The handset ringer may be switched off by following the procedure above and selecting the
‘Zero level’ setting.
With the ringer switched off, will be shown on the display. The phone symbol will
flash when an incoming call is detected.
HANDSET RING TONE
Five Handset ring tones are available, numbered from 1 to 5.
Press then .
The display shows and sounds the current ring Style setting.
Press
The Ring Style will change (1 through 5) for each press of .
Press to store and exit .
USER PREFERENCES
16
maximum (4)
(3)
(2)
minimum (1)
off (0)
Dect 1802 Qk 7/19/02 3:45 PM Page 20