Uniden UBC93XLT - Manual (Page 35)

35
Special Features
• Close Call works better with some types of
transmissions than others. It might not correctly
display frequency information for transmitters
using a highly directive antenna (such as an
amateur radio beam antenna), if there are many
transmitters operating at the same time in the
same area, or if the transmitter is a broadcast
television station.
Setting the Close Call Options
1. Press Func then press and hold for
2 seconds. One of the following Close Call
options appears.
C-C.bnd: Lets you select the Close Call band.
C-C.ALt: Lets you select the Close Call alert
settings.
C-C.PS: Lets you turn Pager Screen on or off.
Pager Screen lets you set the scanner so it does
not detect pager frequencies.
2. Repeatedly press or to select the option
you want, then press E.
If you selected C-C.bnd, one of the following
band names appears.
bnd Lo: VHF Low Band (25.0000 - 88.0000 MHz)
bnd Air: AIR Low Band (108.0000 - 136.9875
MHz)
bnd Hi: VHF High Band (137.0000 - 174.0000
MHz)
bnd UHF: UHF Band (400.0000 - 512.0000 MHz)
bnd 800: 800MHz Band (806.0000 - 956.0000
MHz)
If you selected
C-C.Alt, skip to Step 5. If you
selected C-C.PS, skip to Step 7.
UBC93XLT Paper OM.fm Page 35 Monday, May 14, 2007 9:01 AM
UBC93XLT OM.indd 35 23/9/11 1:58:48 PM