Uniden UBC93XLT - Manual (Page 45)

45
Special Features
Locking Out Channels
You can increase the scanning speed by locking out
channels that have a continuous transmission.
To lock out a channel, manually select the channel,
then press Func + L/O. L/O appears.
Note: You can still manually select locked-out
channels.
To remove the lockout from a channel, manually
select the channel, then press Func + L/O.
L/O disappears.
To unlock all channels in the banks that are turned
on, press Hold to stop scanning, then press Func
and press and hold L/O until the scanner beeps
twice.
Priority
The priority feature lets you scan through the
channels and still not miss important or interesting
calls on specific channels. You can program one
stored channel in each bank as a priority channel
(10 for the banks).
If the priority feature is turned on, as the scanner
scans the bank, it checks that bank's priority channel
for activity every 2 seconds.
The scanner automatically designates each bank's
first channel as its priority channel.
Follow these steps to select a different channel in a
bank as the priority channel.
1. Manually select the channel you want to select
as the priority channel.
2. Press Func + Pgm, then press Func + Pri.
P
appears to the left of the selected channel
number.
UBC93XLT Paper OM.fm Page 45 Monday, May 14, 2007 9:01 AM
UBC93XLT OM.indd 45 23/9/11 1:58:52 PM