Asus P6-P7H55E - Manual (Page 41)

4-4 Chapter 4: BIOS setup
4.1.2 ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an
OS-based utility.
Note
ASUSTek EZ Flash 2 BIOS ROM Utility V3.36
Current ROM
A:
BOARD: P6-P7H55E
VER: 0206 (H:00 B:03)
DATE: 03/14/2009
Update ROM
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
Before you start using this utility, download the latest BIOS file from the ASUS
website at www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port,
then launch EZ Flash 2 in any of these two ways:
• Press <Alt> + <F2> during POST.
• Enter the BIOS setup. Go to the Tools menu, select EZ Flash 2, and
press <Enter> to enable it.
2. Press <Tab> to switch between drives until the correct BIOS file is found,
then press <Enter>. EZ Flash 2 performs the BIOS updating process and
automatically reboots the system when done.
• This function supports USB flash disks with FAT 32/16 format and single
partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!