Uniden DECT2088 Series - Manual (Page 14)

3
Installing the Phone
4
Using Multiple Bases
The.handsets.supplied.with.your.phone.(or.any.DCX200.accessory.handsets).can.be.registered.to.a.total.of.four.
different.bases..Compatible.bases.include.the.DECT2060,.DECT2080,.DECT2085,.DECT2088,.and.DECT3080.
models..Once.your.handset.is.registered.to.more.than.one.base,.you.can.set.the.handset.to.search.automatically.the.
available.base,.or.you.can.select.manually.which.base.the.handset.should.connect.to.(for.example,.if.you.have.one.
base.with.an.answering.machine,.you.can.tell.the.handset.to.connect.that.base.to.check.messages)..
Registering the Handset to Another Base
Make.sure.the.handset.battery.is.fully.charged.
To.register.a.handset.to.DECT2060,.DECT2080.or.DECT3080.base:
Disconnect.the.base.AC.adapter..Then.press.and.hold.
[find hs].or.[find].while.you.reconnect.the.adapter..
Keep.pressing.
[find hs].or.[find].until.the.charge.LED.starts.to.blink.
To.register.a.handset.to.DECT2085.or.DECT2088.base:
With.the.phone.in.standby,.press.[Menu/Select].on.the.base..Move.the.cursor.to.select.the.REGISTER.
HANDSET.menu,.and.then.press.[Menu/Select]..HANDSET.REGISTERING.will.appear.
On.the.handset,.Press.[Menu/Select]..Select.the.REGISTER.BASE.menu..HANDSET.REGISTERING.will.
appear.in.the.display.
Wait.approximately.thirty.seconds..“REGISTRATION.COMPLETE”.will.be.displayed.to.indicate.the.handset.has.
been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.
If.the.display.shows.REGISTRATION.FAILED,.repeat.the.process.again.
)
2)
•
•
3)
4)
UC517BH(DECT2088) book OM 2.indb13 13 1/9/2008 11:07:36 AM