Uniden DECT2088 Series - Manual (Page 9)

7 8
Installing the Phone
Connecting the Base
To avoid risk of fire and shock, only use the Uniden PS-0009 AC adapter with the base.
Route the cord
through the molded
wiring channel.
Connect the handset cord to the
left side of the phone and the base
corded handset.
Connect the AC adapter
to the DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Don’t put any power cord where
it people might trip over it or step
on it. If a power cord becomes
chafed or worn out, it can create
a fire or electrical hazard.
Route the cord
through the molded
wiring channel.
Connect the handset cord to the
left side of the phone and the base
corded handset.
Connect the AC adapter
to the DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Don’t put any power cord where
it people might trip over it or step
on it. If a power cord becomes
chafed or worn out, it can create
a fire or electrical hazard.
UC517BH(DECT2088) book OM 2.indb8 8 1/9/2008 11:07:32 AM