Uniden XSA 975 - Manual (Page 28)

1. Press . ' ' is announced along with the current time. The message counter displays
the current numbers [ ] through [ ] indicating the day of the week.
2. Press or until the correct day is announced. The numbers are
displayed on the base.
3. Press .
Time
1 7
[ ] through [ ]
4. The current recorded hour is announced. Press or until you hear the correct hour
setting. The numbers [ ] through [ ] are displayed on the base as each hour is announced.
5. Press .
6. The current recorded minute is announced. Press or until you hear the correct
minute setting. The numbers [ ] through [ ] are displayed on the base as each minute is
announced.
7. Press .
8. The current recorded AM or PM setting is announced. Press or until you hear the
correct AM or PM setting. The message counter displays [ ] or [ ].
9. Press . A confirmation tone sounds, then the announcement 'Time' and the time and day
are announced for your review. The base LED displays the number that corresponds with the
day of the week.
10. Press to exit menu options.
1 7
1 12
00 59
A P
ANSWERING
SYSTEM
To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN)
code (00-99). To select a PIN, perform the following steps:
1. Press twice. ' ' and the current PIN code is announced as it is displayed on the base.
2. Press or until the desired number appears.
3. Press to select the PIN code. A confirmation tone sounds, then the announcement ' '
and the new PIN code is announced.
4. Press to exit menu options.
5. Record your PIN number on pages 31 and 35 for future reference.
Security Code
Security Code
Page 20
Press and hold
' ' or
' '
to quickly scroll
through the
numbers on the
display.
Skip/ff
Repeat/rew
menu
set
set
set
The PIN code is
set to '80' when
you purchase the
XSA975.
menu
set
SETTING THE TIME
SETTING A PERSONAL SECURITY CODE (PIN)
play
set
rep/rew skip/ff
set/ring
menu
ans on/off speaker in use charge
memo
greeting
delete play/stop
ans vol.