Uniden XSA 975 - Manual (Page 30)

ANSWERING
SYSTEM
Page 22
The Message Alert feature lets you know that you have new messages by sounding a short
beeping tone. If the Message Alert has been set to ' ' and a new message has been received,
the alert tone will sound every 15 seconds. Set the Message Alert tone to ' ' or ' ' by
using the
1. Press five times. ' ' is announced and the current setting
([ ] Off or [ ] On), and it is displayed on the base.
2. Press or to select.
3. Press to select the new setting, a confirmation tone sounds, then the
announcement ' ' and the current setting you have selected is
announced. When the first new message is received, the beeping tone will begin to
sound.
To quickly turn ' ' tone off, press any key on the base unit and the
tone will automatically deactivate. To reset, go back into the menu setup mode.
When all new messages are played using the remote playback feature (page 28) the
' ' tone will automatically deactivate.
On
On Off
Message Alert
Message Alert
Message Alert
Message Alert
following procedure:
4. Press /stop to exit menu options.
OF On
l
l
menu
set
The ' ' feature plays a prerecorded outgoing message, "Hello, no one is
available to take your call. Please call again," but it will not allow the caller to leave a message.
Announce Only
ANNOUNCE ONLY FEATURE
SETTING THE MESSAGE ALERT TONE
rep/rew skip/ff
set/ring
menu
ans on/off speaker in use charge
memo
greeting
delete play/stop
ans vol.