Universal Laser Systems X2-600 - Manual (Page 4)

Specifications
Model Number
X-600 or X2-600
Resolution
1000 x 1000 DPI, 500 x 500 DPI, 333 x 333 DPI, 250 x 250 DPI
200 x 200 DPI, Draft
Computer Needed
Windows 95 or 98, PC compatible
Work Area
32” x 18” (812.8 mm x 457.2 mm)
Table Size
37” x 23” (939.8 mm x 584.2 mm)
Maximum Part Size
37” (939.8 mm) wide x 23” (584.2 mm) deep x 9” (228.6mm) tall
Laser Source(s)
15, 20, 25, 30, 35, 40, 45, 50 Quick Change Laser Cartridge
(X2-600 only) 15, 20, 25, 30, 35, 40, 45, 50 Quick Change Laser Cartridge (Laser #2)
Lenses Available
Focal Length / Spot Size / (Standard or Optional)
1.5” (38.1mm) / 0.003 inches (.08 mm) / Optional
2.0” (50.8mm) / 0.005 inches (.13mm) / Standard
2.5” (63.5mm) / 0.007 inches (.18 mm) / Optional
4.0” (101.6mm) / 0.013 inches (.33 mm) / Optional
Interfaces
Centronics parallel, RS232C Serial
Memory Buffer
Multiple and Single file storage modes, automatic data compression
Dimensions
38” high x 44” wide x 38” deep (965 x 1117 x 965mm)
Weight
approximately 320 lbs. (145 kg)
Safety
CO2 interlocked safety enclosure = Class I
Red Pointer Diode = Class IIIa
Available Options
Rotary Fixture, Air Assist, Honeycomb Cutting Table
Facility Requirements
Power (X-600)
Single Phase 110/220V AC, 15/8 Amp, 50/60 Hz
(X2-600) Single Phase 220V AC, 8 Amp, 50/60 Hz
Exhaust
Outside exhausting required, two 4” connections,
500 CFM minimum (250 at each connection) at 6 inches static pressure
(425m
3
/hr at 1.5kPa)
Cooling
Air-cooled (ambient temperature 50ºF (10ºC) to 95ºF (35º C))
Specifications are subject to change without notice.