UMAX Technologies Astra 2100U - Manual (Page 63)

UMAX Astra 2100U Owner’s Guide
57
2. Select the e-mail application (only Microsoft Exchange and
Lotus cc:Mail are supported) to send the scanned image to, by
clicking on the arrow to the right of the Mail Destination field.
3. Select the type of image you are scanning by clicking on the
arrow to the right of the Document Type field and choosing one
of the available document types from the drop-down menu.
4. Select the desired resolution by clicking on the arrow to the
right of the Resolution field and choosing one of resolution
presets from the drop-down menu.
5. Select a scanning intensity level (brightness) by clicking on the
arrow to the right of the Brightness field and choosing the
desired brightness level from the drop-down menu.
6. Original indicates the type of material the original image is
printed on. Select either Reflective or Transmissive by clicking
the arrow to the right of the Original field.
7. Select the file size for the scanned image by clicking on the
arrow to the right of the Scan Area field and choosing the
desired dimensions from the drop-down menu.
8. Click the OK button to save the Custom E-mail push button
configuration settings. The Custom setting is now configured to
scan and send the scanned image to the selected e-mail
application.
To configure the Custom button to scan and OCR a document,
refer to the To configure the values for the OCR (Optical
Character Recognition) function section that follows.
NOTE: You can also click the Default button to return the
values in each field to the default settings. Then click OK save
these values for the e-mail function of the Custom button.