UMAX Technologies Astra 2100U - Manual (Page 69)

UMAX Astra 2100U Owner’s Guide
63
Using VistaScan to Scan a Photo
to E-mail
Scanning an image to e-mail is similar to the procedure described in
the Using VistaScan to Scan and Print Images section earlier in this
guide. Follow steps 1 through 3 as listed in the Scan and Print
instructions, then proceed with the following steps:
1. Click on the E-mail icon to set the scanner settings to the best
values for scanning an image to e-mail.
NOTE: You may need to adjust the destination preferences in
the VistaScan Beginner window. For information about setting
preferences, refer to Setting the VistaScan Preferences section.
2. Click on the Web Image icon in the Click to Scan area of the
VistaScan Beginner window. The scanner starts scanning the
image using the appropriate settings for web images.
3. After the image is scanned, a Microsoft Exchange or Lotus
cc:Mail e-mail window appears with an icon representing the
scanned image embedded in the message area of the window.
NOTE: For more information about using Microsoft Exchange
or Lotus cc:Mail refer to the user documentation that came with
the application.
4. Fill out the rest of the standard e-mail information (address,
subject, etc.) as you ordinarily would. Send the e-mail.
Using VistaScan with PhotoDeluxe to
Create Web-ready Images
You can add flair to your Web pages by importing scanned photos.
The version of PhotoDeluxe is different for PC and Macintosh
users. Follow the appropriate set of instructions based on the type
of system you are using.