Uniden PCN300 User Manual
Page 5
10/100 Ethernet PCMCIA Card
7
4. Windows will indicate that the installation has been
completed. Click the Finish button to continue.
5. To finish installing the new hardware, you must restart
your computer. Click the Yes button to restart your
computer.
10/100 Ethernet PCMCIA Card
8
Windows 2000 & XP Driver Installation
1. Windows 2000 and XP will automatically install this Plug
and Play PC Card. No driver installation is required.
2. To verify the driver installation or locate the PC Card to
change network configurations, right click on My
Computer and select Properties. Select Hardware and
select Device Manager and click on Network adapters.
You will find the PCI adapter labeled Realtek: RTL8139
(A)-based PCI Fast Ethernet Adapter if it is installed
successfully. The PC Card driver installation is complete.