Uniden PCN300 - Manual (Page 6)

10/100 Ethernet PCMCIA Card
9
LED Indicators
LED Color Function
F
Red On = Connected to Laptop and
Functioning Properly
Off = Not Connected
L Red Flashing = Network Activity
Specifications
Standards: IEEE 802.3 10 Base-T
IEEE 802.3u 100 Base-TX
IEEE 802.3x Flow Control
PCMCIA Type II
Bus Interface: 32-bit Bus Master
Connectors: 1 RJ-45 10/100 Ethernet Port
Provided
drivers:
Microsoft Windows 95, 98, Me, 2000, XP
Max Speed:
Full Duplex
Half Duplex
200Mbps (for 100BaseTX), 20Mbps (for
10BaseT)
100Mbps (for 100BaseTX), 10Mbps (for
10BaseT)
Electromagnetic
Compliance:
FCC Part 15 Sub Class B, IC
Environmental
Specifications:
Operating temperature: 32° - 122° F
(0° to 50° C)
Warranty: Limited 1-year warranty
10/100 Ethernet PCMCIA Card
10
Legal Notice
Statement of Conditions
Uniden reserves the right to make changes to the products
described in this document without notice.
Uniden does not assume liability due to the user or application
of the product(s) or circuit layout(s) described herein.
IC Notice:
This Class B digital apparatus complies with Canadian
ICES-003.
FCC Information
Federal Communications Commission (FCC) Compliance
Notice: Radio Frequency Notice
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular