Univex UDB275MP - Manual (Page 13)

13
English
UDB275MP
Basic Operations
Adjusting the fader
1. Press the [A-M] button and select “FAD 0”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
∗
The factory default setting is “FAD 0”.
Setting the Z-Enhancer
This unit is provided with 3 types of sound tone
effects stored in memory. Select the one you
prefer.
∗
The factory default setting is “Z-EHCR OFF”.
Adjusting MAGNA BASS EX
The MAGNA BASS EX does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
∗ The factory default setting is off.
1. Press and hold the [A-M] button for 1 second
or longer to turn on the MAGNA BASS EX
effect. lights in the display.
2. Press and hold the [A-M] button for 1 second
or longer to turn off the MAGNA BASS EX
effect. goes off from the display.
AUX function
This system has an external jack input in the front
panel where you can listen to sounds and music
from external devices connected to this unit.
1. Connect the external music player to the [AUX]
input. Display will automatically switch to AUX
mode. Alternatively, user can press the [SRC]
button to select the AUX mode.
Notes:
Use only the 3.5mm stereo jack for the AUX jack
input.
Volume can be adjusted through the unit. If you
face difficulties of hearing sound even after volume
has been adjusted, please refer section “Selecting
AUX IN sensitivity” on page 24 for details.
Remove the audio jack from [AUX] input during
AUX mode will revert to Radio mode automati-
cally.
Z-EHCR 1 : bass emphasized
Z-EHCR 2 : treble emphasized
Z-EHCR 3 : bass and treble emphasized
Z-EHCR OFF : no sound effect
(Z-EHCR OFF)
(Z-EHCR 1) (Z-EHCR OFF) (Z-EHCR 2)
(Z-EHCR 3)
Each time you press the [ Z-EHCR ] button, the
tone effect changes in the following order: