Univex UDB275MP - Manual (Page 9)

9
English
UDB275MP
6. REMOTE CONTROL
1. Turn over the remote control unit and slide the
cover in the direction indicated by the arrow in
the illustration.
2. Insert the battery (CR2025) into the insertion
guides, with the printed side (+) facing up-
wards.
3. Press the battery in the direction indicated by
the arrow so that it slides into the compart-
ment.
4. Replace the cover and slide in until it clicks into
place.
Notes:
Misuse may result in rupture of the battery, produc-
ing leakage of fluid and resulting in personal injury
or damage to surrounding materials. Always follow
these safety precautions:
Use only the designated battery.
When replacing the battery, insert properly, with
+/- polarities oriented correctly.
Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
Dispose of used batteries properly.
Inserting the Battery