Operating instructions, Assembly instructions (continued) – Uniflame HBT920W User Manual

Page 6

Advertising
background image

GOLD

Outdoor LP Gas Barbecue Grill Model No. HBT920W

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

For great recipes and tips, visit recipes.uniflame.com.

Operating Instructions

This grill is designed to operate with a one pound 7-3/8” high disposable / 16.4 oz. or 14.1 oz.
propane gas tank (DOT 39 Cylinder).
DO NOT ATTEMPT TO REFILL ANY ONE POUND (16.4 oz. or 14.1 oz.) PROPANE GAS TANKS!

Connecting Gas Tank

1. Make sure the regulator/control valve is in the “LOCK

OFF” position. (Figure 1a)

2. Lubricate the threads of the regulator valve with

petroleum jelly, insert the gas tank into the regulator
valve and hand-tighten firmly. (Figure 1b)

3. Test for leaks

Checking for Leaks

Burner Connection

1. Make sure the control valve is securely fastened to

the burner. (Figure 2)
If your unit was assembled for you, visually check the
connection between the burner and control valve.

WARNING: Failure to inspect this

connection or follow these instructions

could cause a fire or an explosion which

can cause death, serious bodily injury,

or damage to property.

2. If the burner pipe does not rest flush to the control

valve, please contact 1.800.762.1142 for assistance.

Regulator / 1# LP Gas Tank Connection

1. Make 2-3 oz. of leak solution by mixing one part

liquid dishwashing soap with three parts water.

2. Make sure control knob is “OFF”. (Figure 3)
3. Spoon several drops of solution, or use squirt bottle,

at the LP gas tank to regulator connection. (Figure 4)

4. Inspect the solution at the connection, looking for

bubbles.

a. If NO bubbles appear, the connections are

secure.

b. If bubbles appear, you have a leak.

1. Loosen and retighten this connection,

making sure the connection is secure.

2. Retest with solution.

a. If you continue to see bubbles after several attempts, disconnect propane

source and contact 1.800.762.1142 for assistance.

First Use

1. Make sure all labels, packaging and protective films

have been removed from the grill.

2. Remove manufacturing oils before cooking on this

grill for the first time, by operating the grill for at least
15 minutes on “HIGH” with the lid closed. This will
“heat clean” the internal parts and dissipate odors.

Lighting

Caution: Keep outdoor gas cooking

appliance area clear and free from

combustible materials, gasoline and

other flammable vapors and liquids.

Caution: Do not obstruct the flow of

combustion and ventilation air.

Caution: Check and clean burner/venturi

tubes for insects and insect nests. A

clogged tube can lead to a fire beneath

the grill.

1. Make sure all labels, packaging and protective films

have been removed from the grill.

2. Open lid.

Attempting to light the burner with the lid closed may cause an explosion!

3. Make sure there are no obstructions of airflow to the gas unit. Spiders and insects can nest

within and clog the burner / venturi tube at the orifice.

A clogged burner tube can lead to a fire beneath the appliance.

4. Control knob must be in the “LOCK OFF” position. (Figure 3)
5. Turn the control knob to “HIGH”
6. Press the Igniter button repeatedly to light burner.
7. If ignition does not occur in 5 seconds, turn burner control knob OFF, wait 5 minutes and

repeat lighting procedure.

8. If igniter does not light burner, use a lit match secured with the lighting rod provided to light

burner manually. Access the burner through the hole in bottom bowl as indicated. (Figure 5)

Assembly Instructions (continued)

Figure 1a

Figure 1b

LOCKOFF

OFF

LOW

MED

HIGH

PUSH

TO

TURN ON

Figure 2

Figure 3

LOCKOFF

OFF

LOW

MED

HIGH

PUSH

TO

TURN ON

Figure 4

X

X

Figure 5

Match

Figure 6

1/2"

12.7 mm

6.4mm

0mm

1/4"

0"

Flame

10

Lock Lid

Unlock Lid

9

Insert Grease Tray

Advertising