Univex SupraPlus Wireless Headset System - Manual (Page 3)

3 Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538
A. Adjust the Headband
1. To adjust the headband, lengthen or shorten
the band until it fi ts comfortably. The clickstop
feature keeps the headband securely adjusted.
Position the headset receivers so that the foam
cushions sit comfortably over the center of your
ears.
2. On models with only one receiver, position the
stabilizer T-bar above your ear.
3. For a tighter fi t, gently pull the opposite ends of
the headset inward as shown.
B. Adjust the Mouthpiece
1. Carefully bend and shape the boom with both
hands as shown. Avoid bending or twisting the
boom near the microphone or earpiece.
2. Position the clickstop turret and boom so that the
microphone is two fi nger-widths from the corner
of your mouth.
3. Make sure the front of the microphone faces your
mouth. If necessary, twist the micophone slightly
so it’s in the proper position. Do not use forceful
twisting motions or try to turn the microphone
completely around.
A
DJUST FIT
STE
P
1
2"
50.8mm
front back
A
B
1
2
3
1
2
3