Pausing the active route, Deleting the next via point from the route, Deleting the active route – Univex TRAX353 User Manual
Page 65
Page 65
How Do I Use It?
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep
your attention on the road. While driving, you will not be able to set a new
destination or to change settings. The only screen control that remains
enabled is the gesture that puts you back on the Map screen.
The procedure is explained starting from the Map screen.
Tap the following buttons:
,
,
,
.
Pausing the active route
You do not need to pause the active route: when you start driving again,
TRAX353 restarts the voice instructions from your position.
Deleting the next via point from the route
The easiest way to delete the upcoming route point (the next via point)
in Advanced mode is to open the Route Information screen by tapping
the Turn Preview field (
) on the Map screen, and then tapping
.
In Advanced mode, you have another option. Tap the following buttons:
,
,
,
.
Deleting the active route
The easiest way to delete the active route in both Simple mode and
Advanced mode is to open the Route Information screen by tapping
the Turn Preview field (
) on the Map screen, and then tapping
.
In Advanced mode, you have another option. Tap the following buttons: