UMAX Technologies Astra 4000 - Manual (Page 8)

1. Locate the USB cable that is provided. First, plug one end of this cable firmly into the USB port on
the back of the scanner.
2. Second, plug the other end of this cable into the port located on the back panel of the computer.
Macintosh Connection
1. Locate the USB cable that is provided. Plug one end of it firmly into one of the USB ports. IMac
computer ports are located on the right side of the computer, or at either side of the keyboard. The
USB port on other Macintosh computers is located on the back panel of the computer, or on a USB
interface card.
2. Plug the other end of this cable into the port located on the back panel of the scanner.
Connecting the Power Adapter
1. Plug the scanner’s power cord into an electrical outlet.
2. Insert the other end of this cable into the rear panel of the scanner. The power indicator on the front
panel of the scanner should now be illuminated.
8