Uniden DA069 - Manual (Page 11)

TROUBLE SHOOTING
If your Answer Machine is not performing to your expectations, please try these simple steps
first before calling Uniden customer service.
SUGGESTION
• Make sure the telephone line cord is plugged in.
• Make sure that the AC Adaptor is plugged in.
• Make sure the Answer Machine is turned on.
• There has been a power failure.
• The memory may be full. Delete some or all of the
saved messages.
• The incoming messages may be too long.
• The memory may be full.
• Delete some or all of the saved messages
• Adjust the volume control.
Refer page 3
• The memory may be full. Delete some or all of the
saved messages.
• Make sure you’re using the correct PIN number.
• Remote features cannot be accessed if Answer Machine is
turned off.
PROBLEM
Answering system
does not work
Answering System
does not answer
after 3 rings
Messages are
incomplete
No sound on the
base unit speaker
during call
monitoring or
message playback
Cannot record
outgoing message
(OGM)
Cannot access
remote call-in
features from
another
touch-tone phone
7
DA069 V4 Qk 5/17/02 2:40 PM Page 11