Uniden DA069 - Manual (Page 9)

After all messages have played, “End of message(s)” is announced.
To replay a message while you are listening to it, press once . The current message
starts again from the beginning.
To return to a previous message hold down until it beeps. Release button to play the
message.
To play the message at a faster speed, hold down
Release button to resume play at normal speed.
To skip to the next message during playback, press once.
The next recorded message plays.
Deleting Messages
To delete a specific message, press once
while the message is playing.
The Answer Machine beeps once while the message
is playing and deletes the current message, then plays the next.
To delete all messages, hold down when playback has finished.
The Answer Machine announces “Erase message(s)”, then sounds a long beep.
REMOTE OPERATION
Call Your Telephone From Any Remote Location Using A
Touchtone Phone
When you hear the OGM, enter your security code (915- factory default).
After the Answer Machine beeps once to verify you entered the code correctly, enter the
number(s) for the function(s) you want the Answer Machine to perform.
(Functions list on page 6)
Changing The Remote Operation Security Code
The remote operation security code is preset to 915, but you can change it by following
these steps.
1. Hold down until the Answer Machine beeps once.
2. Press and the security code “915” is announced, then it announces the first digit “9”.
3. Repeatedly press or to set the first digit, then press .
The Answer Machine announces the second digit “1”.
4. Press or to set the second digit, then press .
5. Press or to set the third digit, then press .
The Answer Machine sounds a long beep and announces the new security code.
delete
delete
delete
ogm 1
set
volume
answer
time
ans off
ans on
D IGIT AL A NSWERING
M ACHINE
DA069
Superb
Digital
Sound
Quality
The Answer
Machine does not
delete messages
that have not been
played to the end.
If you have
messages that have
not been played,
the Answer
Machine sounds
four beeps.
Be sure to set each
digit within 8 sec-
onds. Otherwise,
you must start over
from Step 1.
set
5
set
set
set
DA069 V4 Qk 5/17/02 2:40 PM Page 9