Customize connection settings – Univex Pre p100eww User Manual
Page 235
Section 3C: Your Connections to the Web and Wireless Devices
235
Wirele
ss Co
nnections
Customize Connection Settings
Do not change Wi-Fi settings unless you are having trouble connecting to a network.
1.
Open Wi-Fi .
2.
Tap the network name.
3.
In Automatic IP settings, tap On or Off.
When Automatic IP settings are on: The IP address is automatically and dynamically
configured.
When Automatic IP settings are off: You can manually configure the IP address.
4.
If you turned automatic IP settings off, enter any of the following:
IP Address
Subnet Address
Gateway
DNS Server: addresses (#1 and #2)
5.
Tap Done.
Before You
Begin
You must be connected to the network you want to customize (see
“Connect to a New Open Network” on page 232, “Connect to a New Secure
Network” on page 233, or “Connect to a Previously Used Network” on
page 234).