Uniden DMX 776 - Manual (Page 72)

[ 7 1 ] T r o u b l e s h o o t i n g w w w . u n i d e n . c o m
The handset doesn't ring
or receive a page.
• Make sure that you are not too far from the base.
• Charge the batteries in the handset for 15-20 hours by placing the handset on
the base or charging cradle.
• Change the Digital Security Code (see page 13).
Severe noise
interference.
• Keep the handset away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent
lights, and electrical appliances.
• Move to another location or turn off the source of interference.
The Caller ID does not
display.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current.
There may be a problem with your Caller ID service.
You cannot register the
handset at the base. • Charge the battery pack for 15-20 hours.
• Change the Digital Security Code (see page 13).
The handset doesn't
communicate with other
handsets.
• Change the Digital Security Code (see page 13).
• Make sure that you have registered all handsets.
An extra handset can't
join the conversation. • Make sure there are not 2 handsets already using the conference feature.
• Make sure that another handset is not in privacy mode.
Room Monitor feature
does not work.
• Make sure to place the handset(s) within the range of the base.
Symptom Suggestion
T
r
oubleshooting