Uniden DMX 776 - Manual (Page 9)

S e t t i n g u p t h e P h o n e [ 8 ] w w w . u n i d e n . c o m
Connect the base unit and charge the handset
1) Connect the AC adapter to
the DC IN 9V jack and to a
standard 120V AC wall
outlet.
2) Place the handset in the
base unit with the keypad
facing forward.
NOTE: The rechargeable
battery is already installed in your phone.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is
plugged in and the handset makes good contact with the base
charging contacts.
4) Charge your handset at least 15-20 hours before plugging into
the phone line.
5) Once the handset battery
pack is fully charged,
connect the telephone line
cords to the TEL LINE jack
and to a telephone outlets.
•Use only the supplied
AD-800 AC adapter. Do
not use any other AC
adapter.
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
•Don't place the base in
direct sunlight or
subject it to high
temperatures. The
battery may not charge
properly.
If your telephone outlet
isn't modular, contact
your telephone company
for assistance.
note
Setting up the
P
h
one