Installation requirements, Caution, Burning solid fuels – United States Stove Company 6039T User Manual

Page 7: Shelled corn, Wood pellets, Floor protection

Advertising
background image

USSC

7

FLOOR PROTECTION

The American Harvest Multifuel Stove may be installed on a combustible floor, with proper floor protection, or

on a masonry hearth. The hearth or noncombustible floor protector must extend a minimum of (6) inches (152mm)in

front and (6) inches (152mm) from each side of the unit.

INSTALLATION REQUIREMENTS

SHELLED CORN

(Dry, preferably corn with 11- 12% moisture content)


Corn must contain less than 14% moisture content. Wet corn will rapidly deteriorate stove components, reduce

efficiency and void all warranties. Purchase a moisture tester if in doubt.
Corn must be clean and free from debris. Never burn corn right from the field. Damage caused by dirty corn is not

covered by the product warranty. Ask for clean filtered bagged corn only. Stalk parts, excessive fines and cob

remnants will clog the auger. Check your corn for foriegn objects.
NEVER BURN SEED CORN IN YOUR STOVE. Seed corn is treated with chemical pesticides that are harmful or fatal if

swallowed, therefore, seed corn is dangerous to have in the house, especially where children can reach it.
Never burn “Deer Corn.” It frequently contains molasses/sugars.
Store your corn supply in a dry place and keep bags or container sealed to prevent your corn from absorbing excess

moisture. Test the moisture content periodically to ensure the proper dryness.
There are many varieties of corn grown around the world. Each variety has unique characteristics including the shape

and size of the kernel. Your stove will burn more consistently with a small to midsize kernel corn. If the kernel size of

the corn varies greatly or if you switch sources frequently, you will get a less consistent burn. Therefore, purchasing

corn from the same source will help achieve a more consistent burn. DO NOT USE CORN WITH A HIGH WAX

CONTENT!

WOOD PELLETS


As with corn, be consistent in your pellet supplier. Pellets will vary in content and burn characteristics from supplier to

supplier. A consistent supply of pellets will result in a more consistant and efficient burn.
Check your pellets for foreign objects. Your stove warranty will not cover damage done to your stove due to foreign

objects in the fuel supply.
Store your pellets in a dry place to prevent them from absorbing added moisture.
To decrease sawdust buildup, the hopper and auger tube will need to be vacuumed out after every 6-8 bags of pellets

or more often if the pellets are poor quality. The hopper should be empty of fuel when this is performed. You may have

to screen each bag of pellets if sawdust becomes a problem.
Wood Pellets vary in size and ash content from less than 1% to 3% or more. Your stove will burn more efficiently with

small to midsize pellets. Low ash content pellets will allow you to burn the stove longer between cleanings. Only wood

pellets manufactured to the Association of Pellet Fuel Industries (A.P.F.I.) standard for residential pellets fuels are

recommended. Performance will suffer if nonstandard pellets are used. Consult your local American Harvest dealer

for more information on approved wood pellet fuel.

CAUTION:

DO NOT PLACE SUCH FUELS WITHIN THE SPACE HEATER’S

INSTALLATION CLEARANCES OR WITHIN THE SPACE REQUIRED FOR FUELING AND

ASH REMOVAL.

BURNING SOLID FUELS

continued...

Advertising