Vizio GV52L FHDTV10A - Manual (Page 11)

VIZIO GV52L FHDTV10A User Manual
Version 10/4/2007 11
www.VIZIO.com
6.4 Component Program Codes..............................................................................................................................73
Chapter 1
Basic Controls and Connections
1.1
Front Bezel
Power ‘VIZIO’ light – The VIZIO name lights white
when powered on and orange when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the
sensor. Point the remote control directly at this window
for the best response to the remote signal.
1.2
Right Side Panel Controls
Power ( ) – Switch the GV52L FHDTV10A on by pressing the button once.
Press the button again to the GV52L FHDTV10A off.
Menu – This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will return to the previous menu level.
Channel ▲/▼ – Use these buttons to step up or down the TV channels.
While the OSD is active, these buttons function as up and down controls in
the OSD menus.
Volume ◄/► – Use these buttons to increase or decrease to the speaker
volume. While the OSD is active, these buttons function as left and right
controls in the OSD menus.
Input (Enter) – Repeated pressing of this
buttons steps through the input sources in the
following sequence: TV, AV1 (S-Video or Video),
AV2, Component 1, Component 2, RGB, HDMI1,
HDMI2, HDMI3 and HDMI4. Once you have
stepped through the entire sequence, you will
return to the beginning.
Additionally, when the OSD is active, this button
confirms the menu function to be adjusted.
When the OSD is not active, pressing this button
will display the current input mode.