Preparing your lcd hdtv for wall mounting – Vizio GV52L FHDTV10A User Manual
Page 6
VIZIO GV52L FHDTV10A User Manual
Version 10/4/2007
6
www.VIZIO.com
Preparing Your LCD HDTV for Wall Mounting
The VIZIO GV52L FHDTV10A can either be kept on the stand base or mounted on the wall for viewing. If
you choose to mount the GV52L FHDTV10A on the wall, please follow the instructions below for
removing the stand base.
To find the perfect mount for the VIZIO GV52L FHDTV10A, browse VIZIO’s certified mount selection at
IOCE (888-849-4623).
To remove the stand base
Unplug all of the cables and cords from your GV52L FHDTV10A.
Place the GV52L FHDTV10A face down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent any damage to the TV.
Pull the stand cover off by squeezing the sides to release the
retaining plastics tabs.
Remove the six (6) screws
(screws’ specs: M5, 1.0 Pitch,
15mm) so that the stand base
can be removed.
Gently remove the stand base.
Now, the GV52L FHDTV10A can fit securely to a mount (sold
separately) by utilizing the mounting holes in the center of the
back panel of the TV. Please make sure to read the
instructions of your specific mount to properly hang the GV52L
FHDTV10A.
The pitch of the mounting holes is 630mm horizontally and
200mm vertically.
The screw type required is metric M8, 1.25mm pitch. The
length of the screws will depend on the thickness plate being
attach to the TV set, our brackets come with 25mm long
screws.
To find the perfect mount for the VIZIO GV52L FHDTV10A, browse VIZIO’s certified mount selection at
or call directly 888-VIZIOCE (888-849-4623).