Vivitar DVR 850W - Manual (Page 25)

24
DC camera mode. On turning on your camcorder the first mode to appear is
the DV mode. To change between the function modes on your DVR, press
the DV or DC button.
The camcorder has 64MB of built in memory. Use a compatible SD card of
up to 8 GB to expand the memory capacity to capture even more memorable
photos than can be captured using internal memory only.
The photo icon will now appear on the top right corner of the LCD.
1. The amount of photo left to take at that resolution and memory appears
on the bottom right of the LCD.
2. Aim the camcorder at the subject or object you wish to capture.
3. Use the image that appears in the LCD to compose your shot.
4. Hold the camcorder steady and press the DC Shutter button again to
capture the shot.
5. The camcorder will emit a capture sound as the photo is saved to
memory.
6. After the shot is taken the number is reduced by one.
7. The photo file will be saved to your memory (internal or SD card) in
JPEG format.
8. The number of photos that can be captured not only depends on the
internal memory or the SD card’s capacity but also on the resolution
selected. Better quality photos are taken at higher resolutions but these will
also take up more memory on the card.
Note:
1. Press the Up button to Zoom In or the Down button to Zoom Out
of the object being photographed.
2. The Zoom icon appears on the bottom left of the LCD screen.
3. You can view the JPEG files in playback mode.
4. As the internal memory of the camcorder is limited to 64MB the
amount of photos that can be captured is limited.