Vivitar DVR 850W - Manual (Page 29)

28
This setting is used to adjust the color of your photos as per your light source.
1. Press the Right/Left/Up/Down button to select the White Balance
menu icon.
2. Press the OK button to open the White Balance submenu.
3. Press the Right/Left/Up/Down button to highlight and select the White
Balance option icon you desire:
Auto /Daylight /Cloudy /Fluorescent / Tungsten
4. Press the OK button to confirm, save your choice and exit to the Setting
menu.
5. Press the DC button to revert back to the Photo capture mode to start
capturing photos with the new white balance setting selected.
Note:
After selecting your White Balance choice, the corresponding icon will
appear on the top of the LCD screen.
Exposre
This setting allows you to manually compensate for unusual lighting
conditions such as indirect indoor lighting, dark backgrounds, and strong
backlighting. The exposure value range is –2.0 (Dark) to 2.0 (Bright)
1. Press the Right/Left/Up/Down button to select the Exposure
menu icon.
2. Press the OK button to open the Exposure submenu.
3. Press the Left/Right buttons to select the exposure setting as per the
present light condition:
EV-2.0 / EV-1.7 / EV-1.3 / EV-1.0 / EV-0.7 / EV-0.3 / EV+0.0 / EV+0.3 /
EV+0.7/ EV+1.0 / EV+1.3 / EV+1.7/ EV+2.0