Vizio RP56 - Manual (Page 22)

VIZIO RP56 User Guide
040330 19
Using RGB Video
1.
Turn off the power to the DLP TV and HDTV Set-Top Box.
2. Connect a 15-pin D-Sub RGB cable to the RGB output of your HDTV Set-Top Box and the other
end to the RGB input in the rear of your DLP TV.
3. Connect the Audio Out (Left + Right) on your HDTV Set-Top Box to the RGB Audio In Stereo Mini
Jack in the rear of your DLP TV, next to the RGB connector.
4. Turn on the power to the DLP TV and your HDTV Set-Top Box.
5. Select RGB using the INPUT button on the front of the DLP TV.
Note:
Refer to your HDTV Set-Top Box User Manual for more information about the video output
requirements of the product or consult your Satellite or Cable operator.