Vizio GV46L FHDTV20A - Manual (Page 11)

VIZIO GV46L FHDTV20A User Manual
Version 12/28/2007 11
www.VIZIO.com
6.4 Component Program Codes..............................................................................................................................78
Chapter 1
Basic Controls and Connections
1.1
Front Bezel
Power ‘VIZIO’ light – The VIZIO name lights white
when powered on and orange when powered off.
Remote Control Sensor – This is the window
through which all of the remote control signals pass
to the sensor. Point the remote control directly at
this window for the best response to the remote
signal.
1.2
Right Side Panel Controls
Power ( ) – Switch the GV46L FHDTV20A on by pressing the button once. Press the
button again to the GV46L FHDTV20A off.
Menu – This button activates the On Screen Display (OSD). If a sub-menu is active,
pressing this button will return to the previous menu level.
Channel ▲/▼ – Use these buttons to step up or down the TV channels. While the
OSD is active, these buttons function as up and down controls in the OSD menus.
Volume ◄/► – Use these buttons to increase or decrease to the speaker volume.
While the OSD is active, these buttons function as left and right controls in the OSD
menus.
Input (Enter) – Repeated pressing of this buttons
steps through the input sources in the following
sequence: TV, AV1, AV2 (S-Video), Component1,
Component2, RGB, HDMI1, HDMI2 and HDMI3.
Once you have stepped through the entire sequence,
you will return to the beginning.
Additionally, when the OSD is active, this button
confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the
current input mode.