Vizio GV46L FHDTV20A - Manual (Page 33)

VIZIO GV46L FHDTV20A User Manual
Version 12/28/2007 33
www.VIZIO.com
Chapter 3
Setting Up to Watch Television
For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6.
3.1
Basic LCD HDTV Start Up
1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the LCD HDTV, and then
plug the power cord into an AC wall socket.
2. Connect Audio and Video Cables to the LCD HDTV
(see pages 18 ~ 31 for detailed steps)
3. Turning Power On
Once all the components are connected, press the Power ON button on the side of the LCD
HDTV, or press the Power ON (Red) button on the remote control.
4. Initial Setup
After powering on the TV set, the Initial
Setup screen will come up; please press
the OK key on the remote control.
a. The Language choice screen will be
displayed; the default English option
is highlighted. If you wish to change
the OSD language to Français or
Español, press the button on
the remote control to select the
language you want.
Press the button on the remote
to go to the next screen.
Note:
At this point,
i
f a Set-Top Box from your Local Cable or Satellite Service Company or other
equipment is been used; please press the EXIT key on the remote control and go to Step 5. If this is not
your case, please continue at Step b.