Vizio P42 - Manual (Page 34)

Version - 2/21/2005 33
www.vizioce.com
3.4.4 - Setting a Password
You control access to the Parental Control features with a password. The default password is
“0000”. You can change the password to any four-digit number.
To change the password:
1. Press the TV component button.
2. Press the MENU button on the remote control and the Main
Menu will be displayed on the screen, as shown opposite.
3. Press f until the TV menu is highlighted. Then press
SELECT.
4. Press d until the Password Edit is highlighted.
5. Press the SELECT button to select Password Edit.
6. Enter your new password.
7. Enter the new password again in the Confirm area.
8. Press the SELECT button repeatedly to exit the OSD.
To reset your password:
1. Press the TV component button.
2. Press the MUTE button on remote control.
3. Press the INFO button, and then press the ▲, ▼, ◄, ► and OK buttons. A RESET ACCESS
CODE message appears. Your password has been reset to 0000.
4. Press the OK button to select CHANGE ACCESS CODE.
5. Use the number button pad to enter a new four-digit password.