Vivitar VIVICAM X027 - Manual (Page 48)

47
Date/Time Menu
When you capture an image with your camera, the image will include a time stamp with the date
and time that the image was taken.
The Date/Time menu allows you to set your camera‟s date and time as desired. You can also
disable the timestamp for future images that will be taken with your camera.
On – The timestamp will appear on photos taken
Off – The date stamp will not appear on photos taken
To Enable/Disable the Timestamp:
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.
3) Press the UP or DOWN direction control buttons to scroll through the menu options.
4) Press the SET button to select and save the desired option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the MODE button to exit the menu and return to your previous mode.
8) Remember that this setting will be saved by your camera until you manually change the
setting or rest
ore the camera‟s default factory settings.
To Set the Date and Time:
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.
3) Press the UP or DOWN direction con trol buttons to highlight the “Date Setup” menu option
then press the SET button to select the option.
4)
The “Date Setup” submenu will open.
5) Scroll through the window with the RIGHT and LEFT navigation buttons.
6) For each field in the menu, use the UP and DOWN navigation buttons to set the date and time.
7) When you have finished setting the date and time, press the SET button to save your
settings and return to the previous mode.
8) Press the MODE button to exit the menu without saving your settings and return to your
previous screen.