Setting up your vt9127, Getting st arted – VTech VT9127 User Manual
Page 7
Advertising
7
GETTING ST
ARTED
SETTING UP YOUR
VT9127
1. Plug the AC adaptor into an electrical outlet, and the AC connector to the bottom of the
Base Unit. If the Handset battery pack has not been charged previously, place the Handset
in the Base Unit cradle, and allow it to charge for 16 hours.
2. Connect the telephone line cord to the jack on the bottom of the Base Unit, and the other
end to the wall jack.
TEL. LINE
9V AC
A fully charged battery pack will provide a maximum talk time
of 4.5 hours, with a maximum standby (off cradle) time of 6
days.
Advertising