Ringer selection, Tone/pulse selection, Setting up your vt9127 – VTech VT9127 User Manual
Page 8: Getting st arted
8
GETTING ST
ARTED
SETTING UP YOUR
VT9127
RINGER SELECTION
1. Press PROG/CHAN.
2. Press
or
until the screen displays RINGER:
and the current setting.
3. Press SELECT. The current selection will flash,
and you will hear a sample of the selected ring.
4. Press
or
to select a different ring style (there
are 4), or turn the ringer OFF.
5. Press SELECT to confirm your choice.
NOTE:
If the ringer is set to OFF, the display will
show “RINGER OFF” in idle mode.
TONE/PULSE SELECTION
NOTE:
Your
VT9127
is factory-preset for TONE
dialing.
1. To change dialing mode, press PROG/CHAN.
2. Press
or
until the screen displays DIAL
MODE: and the current setting.
3. Press SELECT. The current setting is flashing.
4. Press
or
to change the setting.
5. Press SELECT to confirm your choice.