Vizio VP50HDTV - Manual (Page 27)

VIZIO VP50HDTV User Manual
Version 4/17/2007 27
www.VIZIOCE.com
2.7
Connecting a PC Computer
1. Turn off the power to the Plasma TV and PC Computer.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the
other end to the RGB PC input (blue area) at the rear of the Plasma TV.
3. Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the
rear of the Plasma TV.
4. Turn on the power to the Plasma TV and PC Computer.
5. Select RGB using the INPUT button on the remote or
side of the Plasma TV, or directly by pressing the RGB
button on the Remote Control.
Note:
a) For the best picture quality when connecting a pc
computer through RGB PC, set your pc computer
timing mode to VESA 1024x768 at 60Hz. Please refer
to the pc or graphic card’s user guide for additional
information on how to set the timing mode.
b) Refer to your pc computer user manual for more
information about the video output requirements of the
product.
c) A RGB (VGA) cable and stereo mini jack cable are not
included and can be purchased at an electronics store.