Vizio VP50HDTV - Manual (Page 48)

VIZIO VP50HDTV User Manual
Version 4/17/2007 48
www.VIZIOCE.com
3.5.5
Advanced Image Settings for PC
Auto Adjustment - Automatically sets the position
and size of the picture.
Image Position - Allows the user to manually set
the position of the picture on the display.
Phase – Removes any horizontal distortion and
clears or sharpens the displayed characters.
Clock – Removes any vertical distortion and
clears or sharpens the displayed characters.
Color Temp - Options include standard, cool,
warm or customized by the user.
3.5.6
Display Settings
Aspect Ratio – Options include one of the
following: Panoramic (available only in video
mode), Normal, Wide and Zoom (not available
for RGB input). For additional information, see
Section 3.5.10 - Understanding Viewing
Features.
PIP – when you select PIP, the following submenu
options will appear:
PIP Mode – Choose from the following: Off,
Large PIP, Small PIP and POP.
PIP Position – Choose from the following:
Top-Left, Top-Right, Bottom-Left, and
Bottom-Right.
PIP input – Choose the input for the PIP
source from one of the following: AV1 (S-
Video or video*), AV2 (S-Video or video*),
Component 1, Component 2, HDMI 1,
HDMI 2, and RGB.
*S-Video has priority. If a signal is connected to AV1
S-Video by itself or signals are connected to AV1 S-Video and AV1 Video simultaneously, then S-Video will be the only
choice for AV1. If a signal is connected to AV1 Video only, then Video will be the only choice for AV1. The same input
priority scheme applies to AV2.
For additional information regarding the PIP source options, see section 3.5.12 - Picture-in-Picture (PIP)
Mode.