Vizio VO47L FHDTV10A - Manual (Page 9)

VIZIO VO47L FHDTV10A User Manual
Version 11/7/2007 9
www.VIZIO.com
Chapter 1 Chapter 1 Chapter 1 Chapter 1 Basic Controls and Connections Basic Controls and Connections Basic Controls and Connections Basic Controls and Connections
1.1 1.1 1.1 1.1 Front Front Front Front Bezel Bezel Bezel Bezel
Power ‘VIZIO’ light – The VIZIO name lights white when
powered on and orange when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the sensor.
Point the remote control directly at this window for the best
response to the remote signal.
1.2 1.2 1.2 1.2 Right Side Panel Controls Right Side Panel Controls Right Side Panel Controls Right Side Panel Controls
Power ( ) – Switch the VO47L FHDTV10A on by pressing the button once. Press the button again to
the VO47L FHDTV10A off.
Menu – This button activates the On Screen Display (OSD). If a
sub-menu is active, pressing this button will return to the previous
menu level.
Channel / – Use these buttons to step up or down the TV
channels. While the OSD is active, these buttons function as up and
down controls in the OSD menus.
Volume / – Use these buttons to
increase or decrease to the speaker volume.
While the OSD is active, these buttons
function as left and right controls in the
OSD menus.
Input (Enter) – Repeated pressing of this
buttons steps through the input sources in
the following sequence: TV, AV1, AV2 (S-
Video), Component 1, Component 2, RGB,
HDMI1, HDMI2, HDMI3 and HDMI4. Once
you have stepped through the entire
sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.