VTech i 5803 - Manual (Page 32)

32
Basic Operation
Base Settings
To access Base Settings, with the Base in the idle ( OFF ) mode, press MENU , scroll down to
BASE SETTINGS
, then press
OK
. You can now access the following setting options:
RINGER VOLUME
RINGER MELODY
KEYPAD TONE
TONE/PULSE
CONTRAST
LANGUAGE
Press
CLEAR
at any time to back out of the Base Settings mode.
Ringer Volume
To adjust the Base Unit ringer volume:
• Press MENU . Scroll down to BASE
SETTINGS
, then press
OK
.
RINGER VOLUME
will be highlighted, press OK . You will see a
graph on the Base display indicating the
current volume setting.
• Press the softkey to lower the ringer
volume. At the lowest setting (graph is
completely clear), the Base will not ring when
a call comes in.
•
Press the softkey to raise the volume.
At the loudest setting, the graph is completely
shaded in.Press
OK to confirm your setting.
Ringer Melody
There are eight Base ringer melody choices. To
change the melody:
• Press MENU . Scroll down to BASE
SETTINGS
, press
OK
. Scroll down to
RINGER
MELODY .
•
Press
OK
. Use either scroll key to sample the
melodies.
• Press OK to confirm your selection.
Base Menu Soft Functions