Vision Fitness X6100 - Manual (Page 6)

6
2
STEP
• Place a teflon washer (10.5x25x1t)
on the threaded stud of the rotation
linkage.
• Place the bracket end of the pedal
arm over the rotation linkage so that
the threaded stud on the linkage
inserts through the hole on the pedal
arm bracket. Fix in place with a
teflon washer (10.5x25x1t) a
washer (10.2x30x2t) and locknut
(M10). Tighten with the 17
MM wrench.
• Place the pedal arm bracket cover
over the bracket and secure in place
with the washer (5.3x10x1t) and
screw (M5x10L). Tighten with the
Phillips screwdriver.
• Repeat these steps on opposite side.
BLUE BAG
2
STEP
Pedal Arm
Bracket Cover
Rotation
Linkage