7 connecting an external receiver/amp – Vizio VP504 FHDTV10A User Manual
Page 27
VIZIO VP504 FHDTV10A User Manual
Version 7/2/2008
27
www.VIZIO.com
2.7
Connecting an external Receiver/Amp
1.
Turn off the power to the PLASMA HDTV and Receiver/Amp.
2.
Using an audio cable (white and red
connectors), connect the cable to the
audio input connectors on the
Receiver/Amp and connect the other
end to the ANALOG OUT (white
area) audio connectors at the rear of
the PLASMA HDTV.
3.
Turn on the power to the PLASMA
HDTV and Receiver/Amp.
4.
Then press the MENU button on the
remote control to open the On-
Screen Display (OSD) menu.
5. Press
the
on the remote control to select the Audio Adjust menu.
6. Press
the
on the remote control to select SPEAKERS.
7. Press the
on the remote control to select OFF so that the sound from the PLASMA HDTV
will now be routed through your Receiver/Amp system.