Vizio VP504 FHDTV10A - Manual (Page 57)

VIZIO VP504 FHDTV10A User Manual
Version 7/2/2008 57
www.VIZIO.com
4.5.9 DTV / TV Input Parental Control
If you want to restrict certain channel and program
viewing, you can do this by turning on the Parental
Control. Selected programs, movies and channels
can then be made available only after an
authorized password has been entered and
accepted by the TV.
When the OK button is pressed, the On Screen
Display (OSD) appears on the PICTURE
adjustment page.
Press the button to display the SETUP page.
Press the button to highlight Parental, then
press the button.
The Password must be entered before the TV will
continue with Parental settings. The default
password set in the factory is 0 0 0 0. If you are
going to use the Parental Control feature you
should change the password.
4.5.10 Channel Block
Press the button to highlight the Channel
Block selection.
Press the button to go to the next screen.
Press the button to highlight the channel you
want to block.
Press the OK button to block the highlighted
channel.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD
completely.
Note: Make sure you write down and store the new password in a secure place.
The Reset All Settings feature (see page 62) does NOT reset the password.