Vantec NEXSTAR 2 NST-355U2 - Manual (Page 13)

Installation: NexStar 2 External 5.25” IDE Enclosure 11
5.2. NexStar 2 External 5.25” IDE Enclosure:
5.2.1. Hardware Installation:
Preparing the 5.25” device:
1) Set the jumpers on the device to MASTER (if applicable). Please refer to the
documentation included with your 5.25” device for information on how to
accomplish this.
2) Place the plastic mounting brackets on the 5.25” device as pictured below
and screw it in place. (note: Each bracket is labeled with either an R or L The
bracket with an R on it belongs on the RIGHT side of the device with the front
of the drive facing you. The bracket with an L on it belongs on the LEFT
side.)
“R” Mounting Bracket