Vantec NEXSTAR 2 NST-355U2 - Manual (Page 18)

Disconnecting the NexStar 2 16
6. Disconnecting the NexStar 2:
6.1. NexStar 2 External 3.5” HDD Enclosure:
Windows 98SE/ME/XP/2000:
1) Make sure all operations using the hard drive within the NexStar 2 has
ceased.
2) Close any windows and programs pertaining to the NexStar 2.
3) If connected by USB, double click the green “Unplug or Eject Hardware” icon
in the system tray and select [Safely Remove Hardware]. Select the device
you wish to remove and click on [Stop]. The system should prompt, “It is now
safe to remove the USB device.” If not, wait for any programs still using the
device to finish and try again.
4) Turn off the NexStar 2.
5) Unplug the USB/Firewire cable from the system.
Mac OS:
1) Make sure all operations using the hard drive within the NexStar 2 has
ceased.
2) Close any windows and programs pertaining to the NexStar 2.
3) From the Desktop, drag the NexStar 2 hard drive to the trash.
4) Turn off the NexStar 2.
5) Unplug the USB/Firewire cable from the system.
Warning: NEVER remove the NexStar 2 while the hard drive is in use. Doing so
may corrupt the data on the hard drive or damage the hard drive, NexStar 2, or
computer.